Windows Media stream capture bytes
1, Windows Media Services installed services
Windows Media Server service is a Windows Server 2003 system comes with one of the components, but the default is not installed, the need to manually add. In Windows Server 2003 operating system, in addition to the use of "Windows Components Wizard" to install Windows Media Services, can also "your server configuration wizard" to achieve.
(1) at the just-installed Windows Server 2003 and into the Windows operating system, the system will automatically run "to manage your server" window. Click on the "add or delete role of" super-links, will show "your server configuration wizard" dialog.
(2) Click the dialog in the "Next" button, the computer will begin to automatically detect all the equipment, operating systems, and test all the network settings. Testing will be completed in the show "configuration options" dialog box, select "custom configuration" option to customize their installation of the necessary network services.
(3) Click "Next" button, will display the "server role" dialog, the "server role" list box lists all the servers can be installed. Most of the system installation and service can be unloaded in the dialog box to choose.
(4) select list box of "streaming media server" option, then click the "Next" button, will display the "choice of summing up" dialog, to review and confirm the choice of options.
(5) Click "Next" button to show the "allocation of components" dialog, and tips will be based on Windows Server 2003 installation CD Add to drive.
(6) installation CD and click "OK" button, the system will start from the CD-ROM copy of the document and install Windows Media Services, and with representatives of the current progress of the installation progress.
(7) after the completion of the installation will display the dialog, this means that this server has been successfully set to streaming media server.
(8) Click "Finish" button to close the wizard and return to "manage your server" window will display streaming media server has been successfully installed.
In addition, Windows Media Services can also "Control Panel", using the traditional "Add / Remove Programs" way to add the installation. In "Windows Components Wizard" dialog box, select the Windows Media Services check box, and in accordance with prompted to insert the Windows installation CD successfully installed.
Windows Media Services installation is complete, will be returned to "manage your server" window. Click on the "streaming media server," the right of the "management of this streaming media server" hyperlink, or then click "Start" -> "Control Panel" -> "management tool" -> Windows Media Services election Items, will show Windows Media Services window. Windows Media Services on the management of all work can be completed by the middle of the window.
The window on the streaming media on a number of basic knowledge, as a portal to its understanding. "Getting Started" tab, click the left side of basic knowledge of an option, you can show on the right side of the explanation.
Second, the production flow of documents
Web services can be used to publish HTML files, and video-on-demand services and streaming media can be used to publish documents. The use of Windows Media Encoder, you can file extension. Wma,. Wmv,. Asf,. Avi,. Wav,. Mpg,. Mp3,. Bmp and. Jpg and other documents converted into Windows Media streaming service using the document. . asf,. wma and. wmv file extension on behalf of the standard Windows Media file format. One. Asf file extension is usually used for the use of Windows Media Tools 4.0 created based on the Microsoft Media content. And. Wma and. Wmv file extension as a Windows Media Encoder the introduction of the standard naming convention, so users can easily distinguish between pure audio (. Wma) and video files (. Wmv) files, the three extension can be The use of the exchange.
1, the installation of Windows Media Encoder
Windows Server 2003 and not in its own Windows Media Encoder, the official website of the need to download Microsoft Windows Media Encoder the English version and then the implementation of the installation process. Need to note that the encoder can be installed in the Windows Media server, but also can be installed on other computers. In other words, the encoder just installed in the implementation of codes (that is, file format conversion) work on a computer.
(1) Double-click the downloaded running Windows Media Encoder installation files, will show the installation wizard dialog, in the installation wizard shows that the components can be installed.
(2) Click "Next" button, will display the "license agreement" dialog, require users to read the end-user license agreement, users can access whether or not to accept the terms of the license agreement, and then click "I accept the terms of the license agreement "Single-option.
(3) select End after clicking the "Next" button, will display the "installation folder" dialog, "installation folder," the text box shows the Windows Media Encoder to be installed. Of course, the other can also enter the installation path. Click the "Browse" button to select other installation path.
(4) Click "Next" button to show "ready to install" dialog, at this time that can now begin to install Windows Media services.
(5) Click "install" button, the installation file to your hard disk will start copying files, and Windows Media Services installed. Upon completion of the installation to complete the installation dialog box will appear, has prompted the successful completion of Windows Media Encoder 9 Series installation wizard.
(6) Click "Finish" button to complete the installation, according prompted to restart your computer.
Then click "Start" -> "procedure" -> Windows Media-> "Windows Media Encoder" option, will be running Windows Media Encoder, and display the "Windows Media Encoder" window.
2, file format conversion
Conversion of the standard file format description should be "to store information on the source coding," in fact that is stored on the hard drive or CD-ROM multimedia files into Windows Media Services can use the streaming media file format, the file format conversion process called encoding. Windows Media Encoder can MPG and AVI format of multimedia files encoded WMV formats.
(1) then click "Start" -> "All Programs" -> "Windows Media" -> "Windows Media Encoder" option will display the "new conversation" dialog. Select the "conversion document" icon, in preparation for converting video files.
(2) Click "OK" button, will display the "new conversation Wizard" window. Directly in "source" box, type the text of the document conversion to the folder and file name, or directly click the "Browse" button to find the documents to convert. By default, output documents and source files are stored in the same folder. Of course, can also be re-designated depositary of the folder.
(3) Click "Next" button, will display the "content distribution" dialog to specify the distribution of content. As a Windows Media programming services, so here should be to choose "Windows Media Server (Stream Processing)" option.
(4) Click "Next" button, will display the "encoding option" dialog, where you can specify audio and video encoding. If the video only be used for LAN or broadband transmission, the choice of high-quality vi
deo and audio, and assign a higher frame rate, to obtain a clear image and the voice of realism. Of course, now occupied by the network bandwidth is high, file storage space it big. Check here each a bit rate will generate a corresponding WMV files, so under normal circumstances, only a bit rate can be selected.
(5) Click "Next" button, will show "Show information" dialog, respectively, in the appropriate text box, type the video file of the relevant information.
(6) Click "Next" button, will display the "check settings" dialog, where you can show the video files and check the relevant information. If there is any mistake, you can click "Back" button to return to the relevant pages related to re-set.
(7) Click "Finish" button, the system will begin to file format conversion. This may take some time and will take patience.
(8) file format conversion is completed, will display the "coding results" dialog box, click the "off" button, to end the format conversion process. To continue to convert a video file, you can click on the "new conversation" button. To check the newly converted video files, click "Play output file" button.
3, the fact-encoded
On the fact the sources of information encoded computing, that is, through audio or video recording equipment audio, video or photographs, and other sources of information encoded operator, will convert them into a stream or document flow process. Fact-source coding on the process and has to store information on the source code similar to the process in particular.
(1) launch Windows Media Encoder, in the "new conversation" dialog on the "Wizard" tab, select "capture audio or video" icon, then click "OK" button, to run the "new conversation Wizard "window. First show of "equipment options" dialog, shown here users can use the video and audio equipment.
(2) Click "Next" button, will display the "output file" dialog, because to save the file created by the need to "file name" text box, type the path preservation and self-definition of a file name, of course, Can also click the "Browse" button to select the Save the file folders.
(3) Click "Next 'button, will display the" content distribution "dialog, in" How to distribute content "list box lists can use the distribution method. Because of the fact-source-flow processing, Here should choose "Windows Media Server" option.
(4) Click "Next" button, will display the "encoding option" dialog. Here shows that the method chosen by the distribution of encoding settings, including video, audio, and bit rate, and so on. If users do not want to use these default settings, can also be made.
(5) Click 'Finish "button, the' open Windows Media Encoder strict" code, you can click "Next" button, will show "Show information" dialog. You can add a show for encoding information, which will use the Windows Media Player, and only when there started the subtitles can be seen.
(6) Click "Finish" button, will open WindowsMedia encoder directly encoded, you can click "Next" button on the set just to check the information, will display the "check settings" dialog.
(7) If confirmed by the settings correct, you can click "Finish" button to complete. It should be noted here is that if selected, "click on the 'complete' capture after the" rehabilitation options, click on "Finish" button immediately after the capture of information and coding. They will not immediately arrested, will display window.
(8) then you can click on the toolbar "Properties" button to view or modify the set. To encode, you can click "encoding start" button. When the coding is completed can click the "Save" button to open the "Save as" dialog, the configuration of the flow of information to save in order to facilitate the future re-use or modify configuration.
(9) streaming media to create a good document, the adoption of the Windows Media Player to enjoy the paper. Can choose "file" menu in the "Open URL" option, the type of document flow of URL, and click "OK" button to play.
In the "Open URL" dialog need to type in the URL, for the following URL address:
Mms: / / server_name / asfname
Mms: / / server_ipaddress / asfname
Mms: / / server_domain / asfname
One, server_name, Server_ipaddress and erver_domain were said indows Media server computer name, IP addresses, domain names, but said asfname flow of the file name.
4, capture screen
Windows Media Encoder can also be used to capture the screen, windows, and also to the screen, the screen in a particular region or window in a period of time capture information on the activities and make presentations to other users for viewing or download.
(1) first launched Windows Media Encoder and Windows Media Encoder in the main window, click on the Toolbar's "new conversation" button, will display the "new conversation" dialog. Select "Wizard" tab of "capture the screen" option, then click "OK" button, will display the "new conversation Wizard" dialog.
(2) in the dialog box can capture the list of three ways, that is a specific window screen region and the entire screen. Select the "special window" option and then click on "Next" button, will display the "window select" dialog. In the dialog "window" listed in the drop-down list of all the activities of the current window, the user may need to select a window to catch.
If the "screen capture conversations" dialog box, select the "screen" option, click the "Next" button will display "screen" dialog, then in the box screen coordinates regional position. If for the convenience, you can click on the screen area selection button, and then to capture the area of the screen and drag the mouse pointer on the screen to select the region. And then capture the screen, Windows Media Encoder main window will be minimized, and will not be arrested at the same time.
If the choice is "the entire screen" option, the entire screen will be information on the activities of all catch down the flow and make the corresponding documents.
(3) select End capture mode and click "Next" button, will display the "Select" dialog. Here, according to require users to enter a file size of the balance between quality and to choose.
(4) Click "Next" button, will show "Show information" dialog, and storage of information sources and fact-source coding similar steps, click the "Finish" button to start coding. If you do not want to set up immediately after the completion of coding, can be lifted, "set up check" dialog "click 'complete' after the capture" option, then click the "Done" button and encoder in the main window to the corresponding Changes.
